Milanofix 1052
Milanofix 1052 Beyaz
White Ceramic Adhesive Mortar
Description:
Cement-based white ceramic adhesive with reduced slip and extended time.
Areas of Use:
Applied on materials such as tiles, mosaics, ceramics, etc. to be used on vertical and horizontal surfaces plastered with lean concrete, reinforced concrete, or cement plaster both indoors and outdoors.
Advantages:
• Easy to apply
• Does not slip.
• It has high adhesive power.
• It can be processed easily and for a long time.
• Can be used on wet floors in kitchen, bathroom, etc.
• Ideal for glass mosaic coating and glass brick applications.
Technical Specifications:
Slipping: ≤ 0.5mm
Adhesion Strength:
– After the Open Holding Period: After minimum 30 minutes ≥ 0.5 N/ mm2
– Beginning: ≥ 0.5 N/mm2
– After Immersion: ≥ 0.5 N/mm2
– After Heat Aging: ≥ 0.5 N mm2
– After Freeze-Thaw Cycle: ≥ 0.5 N/mm2
Temperature Resistance: (-40°C) – (+80°C) Fire Reaction Class: A1
*The above values have been obtained through laboratory tests and are valid for 28 days of the performance.
Application Information:
Application Temperature: (+5°C) – (+35°C) Mixing Ratio: 4,5–6 lt water / 20 kg powder
Usable Time: 3 hours
Open holding time: 30 min. Application thickness: 3–10 mm Time to Get Into Use: 24 hours Average Consumption: 3 – 5 kg/m2
*These values are valid for 23°C of temperature and 50% relative humidity. Times may vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust, dirt, oil, paint residue, and similar foreign matters reducing adherence.
-It should be ensured that the application surface is set.
-The surface must be moistened before the application.
-The dusty surface behind the ceramic should be moistened and wiped.
Mixture Preparation:
20 kg of MİLANOFİX 1052 BEYAZ is slowly added to 4,5–6 liters of water. Stirred until a homogeneous mixture is obtained with a trowel
or a low-speed mixer, leaving no lumps. The homogeneously mixed mortar is rested for 5 minutes and then stirred again to make it ready for application
The prepared mixture should be used within a maximum of 3 hours, the mixtures that are unused during this period should be mixed intermittently, and any mixture mortar that has started to harden or has expired should not be used.
Application:
The prepared mixture should be spread on the surface with the flat part of the trowel to ensure good adhesion and then combed with a notched trowel suitable for the size of the tile to be used. Ceramics must be bonded to the combed mortar within 30 minutes. Good adhesion should be obtained by pressing on the laid material by hand and applying force with a rubber hammer.
-The adhesive should be used by applying to small areas, and any adhesive that delays material bonding and that has started to get crusty should be cleaned by scraping off the surface.
-The excess adhesive in joint gaps should be scraped before drying, and the mortars on the surface should be cleaned with a damp cloth. -Applications should not be carried out in temperatures below 5°C.
-It should not be applied on surfaces that are exposed to direct sunlight and wind without taking protective measures.
-Foreign materials should never be mixed into the mortar.
-After application, all used tools should be washed with plenty of water before drying.
-Grouting can be started after 24 hours.
-Tiles, adhered with the MİLANOFİX 1052 BEYAZ, should not be exposed to water for at least 24 hours.
-Depending on the location and the type of ceramic to be applied, double-sided bonding should be done.
Warnings:
Do not inhale the product directly, as it is cement-based. Avoid contact with skin and eyes.
Reference Standard:
TS EN 12004 -1 / C1TE class C:Cement-based
1: Standard performance
T: Reduced slip.
E: Extended Open waiting time
Color: White
Package: 20 kg kraft bag
Shelf life: 12 months in dry environment and in original package