Milanofix 1952
Usage:
It is used to bond small and medium sized materials such as tiles and
ceramics to be used in lateral and vertical surfaces plastered with lean
concrete, ferro-concrete, screed or cement.
Product Advantages:
• Easy to apply
• Does not slip.
• Its adherence is high.
Technical specifications:
Slip: ≤ 0.5 mm
Adhesion Strength:
– After Open Time: ≥ 0.5 N / mm² After at least 20 min
– Initial: ≥ 0.5 N / mm²
– After Immersion in Water: ≥ 0.5 N / mm²
– After Heat Exposure: ≥ 0.5 N / mm²
– After Freeze-Thaw Cycle: ≥ 0.5 N / mm²
Temperature Resistance: (-30 ° C) – (+70 ° C)
Reaction to Fire Class: A1
*The above values are valid for 28 days of performance, which were
obtained through laboratory tests.
Application Information:
Application Temperature: (+5 ° C) – (+35 ° C)
Mixing Ratio: 4,5-6 lt water / 20 kg powder
Pot life: 2 hours
Open time: 20 min.
Application thickness: 3–10 mm
Grouting Time: 24 hours
Average Consumption: 3 – 5 kg / m2
* These values are valid for 23 ° C and 50% relative humidity. Times may
vary depending on ambient conditions.
Surface Preparation:
– The application surface should be made clean from dust, dirt, oil, paint
residue, and other similar adherence reducing foreign materials.
– Care must be taken to ensure that the application surface is set.
– The surface must be moistened before application.
– The dusty surface behind the ceramic should be moistened and wiped.
Mixture Preparation:
20 kg Milanofix 1952 should be added slowly to 4,5-6 liters of water.
The mixture then should be blended with a trowel or a low-speed
mixer in a way that no floccules remain, until a homogeneous mixture
is obtained. The homogeneously mixed mortar should be rested for 5
minutes and then mixed again to make it ready for application.
The prepared mixture should be used within a maximum of 2 hours and
mixtures that are waiting to be used during this period should be mixed
intermittently. Any mortar which has started to harden or has expired
should not be used.
Application:
The prepared mixture should be spread on the surface with the flat part
of the trowel to ensure good adhesion and then combed with a toothed
trowel suitable for size of the tile to be used. Ceramics must be bonded
to the combed mortar within 20 minutes. Good adhesion should be
provided by pressing on the laid material by hand and applying force
with rubber hammer.
– Adhesive should be used by applying it to small areas and any
adhesives whose material bonding was delayed and has started to cake
should be scraped clean from the surface.
– The excess adhesive in the joint gaps should be scraped before drying,
and the mortars smeared on the surface should be cleaned with a damp
cloth.
Applications should not be carried out in temperatures below -5°C.
– Without taking protective measures, applications should not be made
on surfaces that are exposed directly to sun and wind.
– Foreign materials should never be mixed into the mortar.
– All tools used should be washed after application with water before
drying.
-The grouting process can be started after 24 hours.
– Tiles bonded with Milanofix 1952 should not be exposed to water for at
least 24 hours.
– Depending on the application area and the type of ceramic to be
applied, double-sided bonding should be used.
Caution:
Do not breathe the product directly, as it is cement-based. Avoid
contact with skin and eyes.
Reference Standard:
TS EN 12004 -1 / C1T Class
C: Cement-based
1: Standard performance
T: Reduced slipping
Colors: White
Package: 20 kg. kraft paper bag
Shelf life: 12 months in dry environment and in original packaging